[leszek.b]

Czyli aktywowanie w moim Focusie powinno pójść wg. schematu?

1. GEM->Configuration-> Page 3: read from GEM
2. GEM->Configuration-> Page 3: "ptaszek" na Cruise Control Configuration
3. GEM->Configuration-> Page 3: write to GEM
4. HEC->Configuration-> Page 1: read from HEC
5. HEC->Configuration-> Page 1: "ptaszek" na Cruise Control Configuration
6. HEC->Configuration-> Page 1: write from HEC
7. PCM->Configuration: Read from PCM
8. PCM->Configuration: Save to file
9. PCM->Procedures->Page 2: Read firmware from PCM do BIN-file
10. PCM->Procedures->Page 2: Load firmware from PHF/HEX/BIN-file (zachowany w pkt. 3 wsad PCM)
11. PCM->Configuration: Load from file (zachowany VIDblock, tak "na wszelki wypadek")
12. "Ptaszek" na Integrated speed control (i ewentualnie zmiana wymiaru opon lub mocy alternatora wg potrzeb)
13.------
14. PCM->Procedures->Page 2: Write current firmware to PCM