Tak, trzymamy lewy OK i naciskamy power. Kiedy wyświetli się komunikat o sprzęgle lub pasa trzeba puścić i wcisnąć OK raz jeszcze (dla pewności nawet kilka razy). Jest trochę loterii z tym, ja tez nie wchodzę w menu w 100% przypadków. Czasami zaskoczy za pierwszym razem, a czasami za n-tym
10% wymagało u mnie zmniejszenie AFE z 1000 do 900 (diesel). Benzyna chyba ma mniejsze odchyłki (tak jak pisze
@
cattani75
) Aha AFE jest chyba jako ostatnie w parametrach, dlatego szukaj go strzałką do góry
Cytuję przepis za talkford
Here's how to enter that mode.
Sit in your mondy with the doors closed. Press and Hold the 'OK' button on the
left hand control cluster of your steering wheel.
Switch on the ignition and let the dash info show you the seatbelt status first.
Then it goes into the 'Press clutch to start' notice. At this point before this message
times out, release and press repeatedly and quickly, the same OK button. You will
see all the different status notifications appearing. Once they show, you can use the
up / down arrow select what you want to view. You can do this slowly and the sequence
loops back to the start because you will have missed some when you first entered the
menu.
It can be hit and miss at first but enentually you'll hack it