[tokamil100]

Napisał tokamil100 Goście nie mogą oglądać obrazków w postach. Zarejestruj się klikając tutaj aby uzyskać pełen dostęp do forum.

Zastanawiam się dlaczego to mogłoby zadziałać.

Już wiem, jak ma to działać:

"The fuel additive control unit (FACM) checks the circuit - loop Vref and GND. If the circuit is opened or shorted, it will evaluate it as an error. The added resistance allows you to deceive the control unit.
In my case, sometimes the error P1922 occurred but only in the FACM and no longer in the PCM which turns on the OBD error light. If error P1922 is only in the FACM module, the pump continues to operate as it should and does not affect the motor operation.
You can verify function of pump by diagnosing after refueling and driving a few kilometers in the FACM module using ELMconfig or Forscan as mass of additive ... (increase from zero after reseting)"