Odp: montaz fabrycznych czujników parkowania (PDC)
Witajcie.
W Focusie poliftowym (6 czujników z przodu + 6 czujników z tyłu), które opcje należy aktywować w BCMii oraz APIM aby mieć działające czujniki parkowania przód, tył oraz automatyczne parkowanie itp?
BCMii do wyboru są opcje:
00 - Nie skonfigurowane
01 - Bez pomocy przy parkowaniu
02 - Pomoc przy parkowaniu
03 - Parking assistance, rear and front
04 - Parking assistance, rear and front, angle sensors
05 - Automated parking assistance, rear and front, angle sensors
06 - Advanced automated parking system
Domyślam się, że opcja 05 lub 06 ale czym one się różnią?
APIM:
0 - Brak
1 - Rear Park Distance Control (PDC)
2 - Rear and Front PDC
3 - Rear and Front PDC and Semi-Automatic Park Pilot (SAPP) for North America
4 - Rear SAPP for North America
5 - Rear and Front PDC and SAPP for Europe
6 - Rear SAPP for Europe
7 - Rear and Front PDC with Active Park Assist
8 - Active Park Assist Lite
9 - Active Park Assist Lite Plus (SAPP/POA - 10 Channel)
10 - Active Park Assist CSI
11- Full Active PArk Assist
Bedę wdzięczny za ewentualną pomoc.
|