View Single Post
Stary 03-10-2013, 20:51   #6
mayak
FCP member
 
Avatar mayak
 
Imię: Marcin
Zarejestrowany: 17-05-2006
Skąd: Warszawa
Model: Smax / Fusion Energy
Silnik: 2.0ecoblue / plug-in hybrid
Rocznik: 2019 / 2017
Postów: 5,153
Domyślnie Odp: [mk3][mk4]Forscan - program do diagnostyki i nie tylko

Cytat:
Napisał jacekn8 Goście nie mogą oglądać obrazków w postach. Zarejestruj się klikając tutaj aby uzyskać pełen dostęp do forum.
Podpinałem przed chwilą do mk4 i rzeczywiście jest wypalanie statyczne dpfa. Nie robiłem tego u siebie bo nie mam problemów z dpf a nie jestem pewny czy mu to wymuszone wypalanie nie zaszkodzi jak jest sprawny. Czas wypalania ok 20 min.
napisałem do nich o tym, odpisali następująco:

Q: please tell me if there any danger (side effects) in case of fail in launching static DPF regeneration?

A:We believe no. The procedure usually takes 10-30 minutes (depends on vehicle), regeneration is performed by PCM, FORScan just follows the process and checks results at the end. So, there should be no damage (theoretically). However, DPF regeneration itself is not completely safe (because of high termperatures on exhaust), so it is desirable to test it with help of people who knows what they do. In other words, we would not like to involve into this people who have doubts, because we have doubts ourselves (we are not sure it was correct to announce such a need at all).

do odważnych świat należy
__________________
////// ZMIANA MOCY 1.6tdci 95->115 # 2.0 tdci 140->163 # 1.5/1.6eb 150->182 # Transit 2.2 tdci # diagnostyka # TEMPOMAT # Immobilizer/kluczyki # konfiguracja # spolszczenia # wszystkie modele Europa-USA ////// MAYYAK@GMAIL.COM
mayak jest offline   Odpowiedź z Cytatem