|
Dołącz teraz!
|
Dołącz już teraz do największej społeczności miłośników Forda w Polsce. Zarejestruj się i uzyskaj pełen dostęp do wszystkich działów, tematów i opcji jakie oferuje forum! |
|
Narzędzia wątku | Przeszukaj ten temat |
06-04-2010, 14:49 | #21 |
ford::amateur
Zarejestrowany: 18-03-2010
Skąd: Warszawa
Model: Focus MK2 FL
Silnik: 1.6 TDCI
Rocznik: 2008
Postów: 2
|
Odp: mechanizm składania oparcia przedniego fotela
Poduszka, chyba nie powinna jednak przeszkadzać.
I potwierdzam, są tam linki, na oko 1mm średnicy. moje się przetarły na górze. Narazie tylko się pzryglądałem, jak ktoś ma opis może być przydatny. Będę wdzięczny temu ktosiowi. Pozdrawiam |
12-04-2010, 16:10 | #22 |
ford::amateur
Zarejestrowany: 25-06-2008
Skąd: Warszawa
Model: Ford Fiesta mk6
Silnik: 1.4 TDCi Duratorq
Rocznik: 2003
Postów: 9
|
Odp: mechanizm składania oparcia przedniego fotela
no dobra znalazłem tylko coś takiego - niestety nie w naszym ojczystym języku, jeśli ktoś może to przetłumaczyć to powinno pomóc.. (tłumaczenia google itp. są trochę śmieszne Goście nie mogą oglądać obrazków w postach. Zarejestruj się klikając tutaj aby uzyskać pełen dostęp do forum.) jeśli ktoś będzie miał jakieś spostrzeżenia lub instrukcję wcieli w życie, to wszelkie info mile widziane Goście nie mogą oglądać obrazków w postach. Zarejestruj się klikając tutaj aby uzyskać pełen dostęp do forum.
To remove old one: There's two clips that need to be squeezed in to take out the old one. A spare pair of hands will help for this too but I did manage it on my own. 1. Get a pair of pliers and pull the cable out a bit via the nipple at the top 2. Tie a piece of sting round the nipple - you should be able to pull this so you can lift the seat. (it's handy while waiting for the part to arrive!) 3. The seat needs to be in a forward position so the cable is a bit loose. 4. TAKE OFF THE HEAD REST! - took me ages to work out that was the angle I needed for the step 6! 5. Get your fingers underneath the edge and apply some pressure as if you're trying to pull it out 6. With a flat head screw driver or similar gently (don't rip the cloth) push the screw driver between the cloth and the plastic - first from the top (where the headrest used to be) - with a bit of fiddling you should feel the first half pop out a little. 7. The clip on the bottom is reached from directly above (where the handle used to be) - Pop the screw driver in and twist it to remove the clip. 8. If you have a look at the new part you should see the clips and be able to work it out. 9. With a little fiddling - it should pop out! "Putting in the new one. It's a bit of a funny set up - i expected it to be like a brake cable on a bike but the nipple of the cable doesn't have a specific clip to go in - it just sits in a kinda cup! The below may not be the perfect way - but it worked for me... 1. Carefully remove the new handle from the surround it sits in - i fitted the surround first then the actual handle. Watch out for the spring - you're going to need that! 2. Slot the surround in to place making sure you can still see the nipple on the cable and that the string you tied to it in the first bit is not caught. 3. Pull the string that is tied to the cable toward the back of the seat so it get's the nipple clear of the bottom and puts it in the right place to be picked up by the cup. 4. Now clip the handle back in making sure the spring is 'sprung' - this bit was a bit fiddly but I got there in the end. Once it's all clipped in - you should be there!!" (źródło i może jeszcze jakieś przydatne informacje (?) z forum: [Tylko zarejestrowani użytkownicy widzą linki. ])) |
26-06-2011, 12:33 | #23 | |
ford::amateur
Zarejestrowany: 26-06-2011
Skąd: Poznań
Model: Ford Fiesta
Silnik: 1,3 benzyna
Rocznik: 2005
Postów: 1
|
Odp: mechanizm składania oparcia przedniego fotela
Cytat:
rencen0566 |
|
26-06-2011, 12:41 | #24 |
ford::expert
Imię: Marek
Zarejestrowany: 29-11-2009
Skąd: WOŁÓW\WROCŁAW
Model: Hyundai i30 N Line focus mk3 fl, Astra F, 126p
Silnik: 1,5 TGDI, 1,5 TDCI , 1.4 Pb, prawie 0,7 :)
Rocznik: 2022 2015 1995
Postów: 3,202
|
Odp: mechanizm składania oparcia przedniego fotela
Może być ciężko.Pyszol ostatni raz zaglądał na forum w 2009r.
__________________
Czego prócz śmierci boimy się najbardziej? Uszczelki pod głowicą |
22-08-2011, 20:49 | #25 |
ford::beginner
Zarejestrowany: 19-02-2009
Skąd: Kraków
Model: Fiesta MK6
Silnik: 1,4 TDCI
Rocznik: 2003
Postów: 14
|
Odp: mechanizm składania oparcia przedniego fotela
Wbrew pozorom wymiana linki jest dość prosta i nie trzeba rozbierać fotela (wystarczy tylko zdjąć czarny plastik z uchwytem). W najbliższym czasie wrzucę opis i zdjęcia które przy tym zrobiłem.
|
04-09-2011, 15:31 | #26 |
ford::beginner
Zarejestrowany: 19-02-2009
Skąd: Kraków
Model: Fiesta MK6
Silnik: 1,4 TDCI
Rocznik: 2003
Postów: 14
|
Odp: mechanizm składania oparcia przedniego fotela
Tak jak obiecałem: [Tylko zarejestrowani użytkownicy widzą linki. ] wprawdzie jest to wczesniejsza fiesta, ale schemat pewnie będzie podobny.
Ostatnio edytowane przez radari ; 05-09-2011 o 17:04 Powód: już powinno być ok |
05-09-2011, 06:42 | #27 |
ford::expert
Imię: Marek
Zarejestrowany: 29-11-2009
Skąd: WOŁÓW\WROCŁAW
Model: Hyundai i30 N Line focus mk3 fl, Astra F, 126p
Silnik: 1,5 TGDI, 1,5 TDCI , 1.4 Pb, prawie 0,7 :)
Rocznik: 2022 2015 1995
Postów: 3,202
|
Odp: mechanizm składania oparcia przedniego fotela
link nie działa
__________________
Czego prócz śmierci boimy się najbardziej? Uszczelki pod głowicą |
29-10-2011, 16:20 | #28 |
ford::beginner
Zarejestrowany: 26-03-2008
Skąd: 3city
Model: Focus MK4
Silnik: 1.0 EB
Rocznik: 2019
Postów: 48
|
Odp: mechanizm składania oparcia przedniego fotela
W tym momencie dziala - zassalem pdf'a
|
14-07-2012, 19:48 | #29 |
ford::amateur
Zarejestrowany: 14-07-2012
Model: Ford Fiesta
Silnik: 1.4 TDCI
Rocznik: 2002
Postów: 2
|
Odp: mechanizm składania oparcia przedniego fotela
Witam,
proszę o instrukcję wymiany liki w siedzeniach dla Fiesty mk6. Wszystkei linki na forum sa nieaktywne, dzieki |
16-07-2012, 10:11 | #30 |
ford::beginner
Zarejestrowany: 19-02-2009
Skąd: Kraków
Model: Fiesta MK6
Silnik: 1,4 TDCI
Rocznik: 2003
Postów: 14
|
Odp: mechanizm składania oparcia przedniego fotela
[Tylko zarejestrowani użytkownicy widzą linki. ]
teraz może nie zniknie Goście nie mogą oglądać obrazków w postach. Zarejestruj się klikając tutaj aby uzyskać pełen dostęp do forum. |
Tagi |
fiesta , fotele , mechanizm składania |
|
|